9
GO User Guide
Coupler connect/disconnect
Be sure the GO coupler is connected to the hitch and positive engagement is shown on the
coupler indicator.
Transport mode/control-tilt:
Before moving, be sure that the control-tilt set pin is secured.
Before entering the GO interior, in Camping mode:
Be sure that the stabilizer jacks are lowered to the ground.
Before driving in Travel mode or Transport mode:
Be sure to raise the stabilizer jacks and the swivel jack to their raised position before
driving.
Using the control-tilt loading system:
The GO must be attached to the tow vehicle when using the control-tilt system.
Before traveling in Travel mode:
Secure tailgate and bed platforms with velcro straps.
Tool kit:
It is advised to carry a tool kit while traveling with a GO. Please see the toolkit list
provided in section 1.
Cargo loading:
Be careful of shifting weight of any cargo on the deck. Do not tilt the GO with loads
attached to the rack
Tire wear and care:
Be sure tires are properly inated and tire tread is not worn excessively.
Coupler with indicator showing positive
connection to ball.
Control-tilt set pin with cotter pin.
To Next Page
Loading...