sylvansport GO - Camping Mode

18
GO User Guide
Camping mode - Systems overview
Camping mode provides a spacious, elevated, waterproof tent that sets up fast, with multiple
comfy dining and sleeping options. Congurable components allow you to quickly switch
interior setups for dining, sleeping, and playing that suits the moment.
• (2) Single beds
• (2) Single beds with shelf
• (2) Single beds with table
• (2) Single beds with table and shelf
• (2) Single beds with table and bench
• King-and-a-half sized bed
(2) Single beds:
GO accommodates at least two sleeping campers
comfortably on the bed platforms. Remove and
locate the bed panel packs (mounted to the pod
bottom frame), add the larger mattresses and you
are all set up. In addition, you have the ability to
sleep a third camper on the oor area.
(2) Single beds with shelf:
If you would like to add a shelf between the two
beds, remove one of the bed/table panels from the
overhead storage area. Lay the panel sideways
between the two bed frames so the anges seat
securely and slide to the front, up against the pod
bottom frame.
(2) Single beds with table:
To create a table with bench seating on two sides,
remove one of the bed/table panels from the
overhead storage area. Place one end on the pod
bottom frame bar and hook the other end to a
ratchet strap. Ratchet strap connects to a loop at
the top of the pod bottom frame. Using the
threaded knob provided, secure the table to the
pod bottom frame.