40
GO User Guide
Tent poles
The tent poles are made of high-strength, lightweight aluminum and connected by
weather-proof shock-cord for easy folding. When setting up your tent, simply connect your
poles segments together until you have 3 connected poles: 2-short, 1-long. The 2 short poles
will be inserted into the bed platform sleeves (2) and the 1 long pole will be inserted into the
vestibule sleeve (1). There are also 4 small tent poles (“half-moon”) that are “permanently”
mounted in the bed platform ends.
Be careful not to pinch or bend these poles.
Maintenance
Maintenance on the tent system requires a visual inspection of the tent and the poles. When
inspecting the tent, be sure there are no tears or excessive wear and ensure stitching and
grommets are intact. When inspecting the poles, be sure there are no sharp bends or broken
shock-cord. If damage occurs and replacement parts are required, please contact
SylvanSport by calling (828) 393-4927 or by visiting sylvansport.com
SEVERE WEATHER HAZARD: In some climactic condi-
tions (severe storms, high winds or heavy snow
cover), the GO camping trailer may not be a sucient
shelter. In such circumstances, seek appropriate
shelter: house, cabin or building.
Bed platform poles inserted into grommets.
Aluminum poles with shock cord.
Vestibule pole inserted into frame hole.
“Half-moon” poles inserted in bed platform
ends.
To Next Page
Loading...