31
GO User Guide
14. Step inside and remove bed panel packs from their secured position on the front wall of
the tent and unfold. Drop each one into the reveal in the bed platform base, so it ts
snugly and does not move around.
15.
The air mattresses (2” standard, 4” Cloud layer with Big and All Out packages) and bed/
table panels are stored overhead and in the storage box. To access them, unzip the
overhead zipper in the mesh roof. The mattresses are above the bed/table panels. You
can either leave them there if you choose not to use them, or you can take down one or
two, since the camping trailer has several interior conguration options.
For the full description of the interior congurations, see the Camping mode - systems
overview section.
Panels are designed to be as lightweight and strong
as possible. Do not jump on panels. Do not exceed
250 lbs. of weight per panel and do not puncture
panel.
Orange pole attaches to bed support hole.
Grey poles attach to connector grommets.
King and a half sized
bed.
Two single beds.
Two single beds with table
and bench.
Two single beds with table
and shelf.
Two single beds with table.
Two single beds with shelf.
To Next Page
Loading...