5. USE OF EACH COMPONENT
26
Use of buttons
Left handle - switch 1
(1) Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON", press this button while holding the front or rear
brake lever will start the engine.
(2) High/Low Beam Switch
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
When the switch is turned to this position, all lights will go off.
(3) Hazard Switch
The main switch in the
〝
ON
〞
position, cuts according to this switch, four
directions lantern festivals dodge extinguish do move, also can simultaneously
dodge on the display board direction indicating lamp extinguishes does moves.
If stops the vehicle has when the transportation frequent dangerous position or
the vehicle the breakdown, may use the dangerous police to show the switch.
The cut to this position, on four directions lamps and the display board direction
indicating lamp namely extinguishes.
⑴
⑶
⑵
To Next Page
Loading...
