7. INSPECTION AND MAINTENANCE BEFORE RIDING
42
Transmission oil inspection and change
INSPECTION:
y When ATV is stopped in the level ground, stop the engine and wait 3~5 minutes, Wipe
the transmission oil screen and check whether the oil level is above lower limit or not.
OIL REPLACEMENT:
y Stop the engine on a level ground. Remove the infusion bolt and drain bolt, drain out
the oil.
y Install the drain bolt and tighten it. Fill new transmission oil (650 c.c.), and install the infusion
bolt and tighten it. (make sure that bolts are tightened and check that there’s no leakage.)
※ Recommend Oil: Genuine SYM HYPOID GEAR OIL (SAE 85W-140).
To Next Page
Loading...
