EasyManua.ls Logo

Sym QUADLANDER 250 - 9. PERIODICAL MAINTENANCE SCHEDULE

Sym QUADLANDER 250
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9. PERIODICAL MAINTENANCE SCHEDULE
55
Maintenance
kilometer
300KM
Every
1,000KM
Every
3,000KM
Every
6,000KM
Every
12,000KM
Item
Check Items
Maintenance Interval 1 Month 3 Months 6 months 1 Year
Remarks
1 Air cleaner element(Remark) IC R
2 Fuel filter IIR
3 Oil filter(Screen) CC
4 Engine oil change R Replacement for every 1,000KM or 1 months
5 Tire, pressure II
6 Battery inspection II
7 Brake & free ply check II
8 Steering handle check II
9 Cushion operation check II
10 Every screw tightening check II
11 Gear oil check for leaking II
12 Spark plug check or change IIR
13 Gear oil change R Replacement for every 5,000KM or 5 months
14 Frame lubrication L
15 Exhaust pipe II
16 Ignition timing II
17 Emission check in idling AI
18 Throttle operation II
19 Engine bolt tightening II
20 CVT driving device (belt) IR
21 CVT driving device (roller) C
22 Drive chain I/L I/L C
23 Lights/electrical equipment/multimeters II
24 Fuel lines II
25 Cam chain II
26 Valve clearance IA
27 Lines&connections in cooling system II
28 Coolant reservoir II
29 Coolant II R
The above maintenance schedule is established by taking the monthly 1,000 kilometers
as a reference which ever comes first.
Have your ATV checked and adjusted periodically by your SYM Authorized Dealer or
Franchised Dealer to maintain the ATV at the optimum condition.
Code:I ~ Inspection, cleaning, and adjustment R ~ Replacement
C ~ Cleaning (replaced if necessary) L ~ Lubrication
Remark: 1.Clean or replace the air cleaner element more often when the ATV is operated on
dusty roads or in the Heavily- polluted environment.
2.Maintenance should be performed more often if the ATV is frequently operated in
high speed and after the ATV has accumulated a higher mileage.
3.
Preventine maintenance
a. Ignition system-Perform maintenance and check when continuous abnormal
ignition, misfire, after-burn, overheating occur.
b. Carbon deposit removal-Remove carbon deposits in cylinder head, piston
heads, exhaust system when power is obvious lower. Than ever
Notes in the remarks are used to indicate the applicable models.

Related product manuals