5. USE OF EACH COMPONENT
29
Gearshift lever 1
The gearshift lever has three position: Forward (F)、Neutral (N)、Reverse (R).
Neutral (N)
Use neutral when you start the engine, or if it is necessary to stop briefly with the engine
idling.
Forward (F)
Use this position for normal riding.
Reverse (R)
Use this position to ride in reverse.
If you need to ride in reverse, make sure the area behind you is clear and only operate the
ATV at low speed.
CAUTION:
y Improperly operating reverse could cause you to hit an obstacle or person behind you,
resulting in serious injury.
y Make sure there are no obstacles or people behind you before selecting reverse gear.
When it is safe to proceed, go slowly.
To Next Page
Loading...
