5. USE OF EACH COMPONENT
30
Gearshift lever 2
1.Bring the vehicle to a complete stop, then make sure the transmission is in neutral.
2. Depress and hold down the rear brake level.
3.Be sure there are no obstacles or people in the way.
4.Correctly to catch the rod to disperse into to the R files.
CAUTION:
y If the gearshift lever is moved while the vehicle is moving, the sub transmission may be
damaged.
y If the gearshift lever is moved while the engine revolution is over 3200rpm, the engine will
stop revolving to protect the sub transmission.
y Please always keep the gearshift lever in ‘N’ position when ATV is stop moving.
5.Release the rear brake level.
6.Open the throttle gradually and ride slowly. Do not open the throttle suddenly or make
abrupt turns.
To Next Page
Loading...
