EasyManua.ls Logo

Sym QUADLANDER 250 - 10 Specification

Sym QUADLANDER 250
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10. SPECIFICATION
56
Model
Item Specification
UA25A-6
length 1,890 mm
width 1,055 mm
Height 1,115 mm
Wheel base 1,200 mm
Net Weight 223kg
Type 4- stroke 4V electroplated ceramic cylinders engine
Fuel UNLEADED(OCTANE 92 OR HIGHER)
Cooling type Water-cooled
Displacement 249.4
Compression ratio 10.5:1
Max. HP 19.2 ps / 6,500 rpm
Max. torque 2.28 kgf-m / 5,500 rpm
Starting methods Electrical & foot type
Front shock absorber UNIT SWING
Rear shock absorber UNIT SWING
Clutch Centrifugal type
Transmission CVT
Front tire AT 22X7-10
Rear tire AT 22X10-9
Tire pressure Front : AT22×7-10 /Rear: AT22×10-93.8 ±0.2psi
Front brake Disc type (Ø 175 mm)
Rear brake Disk type (Ø 220mm)
Front light bulb(high, low) 12V 55W / 55W X 2
Brake light bulb(tail light) 12V 5W/21W X2
License light bulb 12V 5W
Turn signal light bulb 12V 21W×4
Speedometer light bulb 12V 1.7W
Engine oil capacity 1.4L( 1.2L for change)
Transmission oil capacity 750cc( 650cc for change)
Fuel tank capacity 12L
Fuse 30A X 1 15A X 2 10A X 1
Spark plug NGK CR8E
Battery capacity YTX12-BS
Air cleaner sponge wet type
Front light General type
Rear grab frame
Can not load cargo

Related product manuals