8
§OPERATION OF IGNITION SWITCH §
“ON” position:
Engine can be started in this position.
Ignition switch key cannot be removed.
“OFF” position:
Engine is shut off and cannot be started
in this position .
Ignition switch key can be removed.
Some models are equipped with intelligent lock.
If the intelligent lock cannot be released under
abnormal conditions, please turn on the switch and
release it with the key.
§OPERATION OF STEERING HANDLE LOCK SWITCH §
“Steering handle lock” position
Turn the steering handle to left and insert the key
into, press ignition switch key clockwise and then
lightly turn it to left to the “lock” position.
The steering handle is locked in this position.
Ignition switch key can be removed.
When unlocking, simply turn the key from the
“LOCK” position to the “OFF” position.
§OPERATION OF SEAT OPEN SWITCH§
Left “OPEN” position: Insert your key into the ignition switch ,and turn it to the left to open
the seat.
CAUTION:
Never operate the ignition switch key when the motorcycle is running. To turn the ignition
switch to “OFF” and “LOCK” position will shut off the electrical system and that may result
in a dangerous accident. Therefore, the ignition switch can only be turned off after the
motorcycle has been completely stopped.
Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your motorcycle.
If ignition switch remains in the “ON” position for a prolonged period after the engine has
been stopped, the battery’s capacity will be reduced and this may affect the engine’s start
ability.
Make sure to take the key away with you before you lock your seat.
To Next Page
Loading...
Need help?
General
