Symantec NetBackup 5230 - Page 166

Table 11-10
Steps for recovering from operating system corruption on the
appliance (continued)
DescriptionActionSteps
An appliance can be reconfigured to your
original configuration.
Symantec recommends that you record all
of your initial configuration information so
that you can reference that information
during the reconfiguration process.
See the section called “Appliance
reconfiguration procedures” on page 127.
for detailed procedures on reimaging and
reconfiguring your appliance.
See "Reconfiguring a NetBackup
appliance" in the Symantec NetBackup
Appliance 2.6 Administrator's Guide for
more information about the reconfiguration
process.
Reconfigure the appliance.Step 3
166Disaster Recovery
Disaster recovery scenarios