Table 12-15
Settings > Authentication
Recommended actionExplanationError messages
Collect the web GUI and Perl logs all using
the DataCollect command and then
contact Symantec Technical Support.
The configured LDAP server
cannot be disabled. This error
can occur in case the LDAP
server is not responsive.
The connection to the web
server is not established.
Could not disable the current LDAP
configuration.
Could not enable the current LDAP
configuration.
Please use either of the following actions to
resolve the error:
■ Verify that the LDAP server is responsive.
■ Verify that you have the correct
authorization to unconfigure the LDAP
server.
■ Verify the connectivity to the LDAP server
using the NetBackup Appliance Shell
Menu.
The configured LDAP server
cannot be unconfigured.
Could not unconfigure the current
LDAP configuration.
Verify the configuration details of the LDAP
server to be configured.
This error can be displayed due
to the following reasons:
■ The provided details for the
LDAP server are incorrect.
■ The LDAP server is not
responsive.
Error while configuring LDAP.
Verify that the provided server name for the
LDAP server is correct.
The provided LDAP server
name cannot be configured.
Error while setting server name.
Verify that the provided base directory name
is correct and do not contain any typos or
spelling errors.
Verify that the base directory name matches
the Active Directory or LDAP server settings.
The provided base directory
name for the LDAP server could
not be configured.
Error while setting base DN.
Verify that the provided bind directory name
is correct.
Verify that the bind directory name matches
the Active Directory or LDAP server settings.
The provided bind directory
name for the LDAP server could
not be configured.
Error while setting bind DN.
Enter a valid password to configure the LDAP
server.
The provided password to
access the LDAP server is
incorrect.
Error while setting password.
185NetBackup Appliance error messages
Error messages displayed on the NetBackup Appliance Web Console
To Next Page
Loading...
