Symbol LS 4208 - Code 39 Full ASCII Conversion; Code 39 Buffering (Scan & Store)

Symbologies
12-25
Code
39
Full
ASCII
Conversion
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable
Code
39
Full
ASCII,
scan
the
appropriate
bar
code
below.
Enable
Code
39
Full
ASCII
*
Disable Code 39 Full ASCII
Trioptic
Code
39
and
Code
39
Full
ASCII
cannot
be
enabled
simultaneously.
Code
39
Full
ASCII
to
Full
ASCII
Correlation
is
host-dependent
and
is
described
in
the
ASCII
Character
Set
table
for
the
appropriate
interface.
See
ASCII
Character
Set
for
Keyboard
Wedge
on
page
5-13
,
ASCII
Character
Set
for
RS-232
on
page
6-18
and
ASCII
Character
Set
for
USB
on
page
7-12
for
the
appropriate
interface.
Code
39
Buffering
(Scan
&
Store)
This feature allows the scanner to accumulate data from multiple Code 39 symbols.
Selecting the Scan and Store option (Buffer Code 39) temporarily buffers all Code 39 symbols having a leading space as a first
character
for
later
transmission.
The
leading
space
is
not
buffered.
Decode of a valid Code 39 symbol with no leading space causes transmission in sequence of all buffered data in a
first-in
first-out
format,
plus
transmission
of
the
“
triggering
”
symbol.
See
the
following
pages
for
further
details.
When the Do Not Buffer Code 39 option is selected, all decoded Code 39 symbols are transmitted immediately
without
being
stored
in
the
buffer.