Symbol LS 4208 - RS-232 Parameter Defaults

Parameter Default Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard 6-7
Baud Rate 9600 6-8
Parity Type None 6-9
Stop Bit Select 1 Stop Bit 6-10
Data Bits (ASCII Format) 8-Bit 6-10
Check Receive Errors Enable 6-11
Hardware Handshaking None 6-12
Software Handshaking None 6-13
Host Serial Response Time-out 2 Sec 6-14
RTS Line State Low RTS 6-15
Beep on <BEL> Disable 6-15
Intercharacter Delay 0 msec 6-16
Nixdorf Beep/LED Options Normal Operation 6-17
Ignore Unknown Characters Send Bar Code 6-17
6-4
LS
4208
Product
Reference
Guide
RS-232
Parameter
Defaults
Table 6-1 lists the defaults for RS-232 host parameters. If any option needs to be changed, scan the appropriate bar
code(s)
provided
in
the
Parameter
Descriptions
section
beginning
on
page
6-5
.
See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous
default
parameters.
Table
6-1.
RS-232
Host
Default
Table