174
5. Replaceable Parts
Introduction
This chapter contains information for ordering parts.
Replaceable Parts Table
Table 5-1 is a list of replaceable parts and is organized as follows:
1. Electrical assemblies in alphanumerical order by reference designation.
2. Chassis-mounted electrical parts in alphanumerical order by Chassis-
mounted mechanical parts in alphanumerical order by reference
designation.
The information given for each part consists of the following:
1. Reference designation.
2. Part number.
3. Description of the part.
Table 5-2 lists parts that are unique to the 48Vdc or telecomm output options.
How To Order A Part
Symmetricom wants to keep your parts ordering process as simple and
efficient as possible. To order parts perform the following steps:
1 Identify the part and the quantity you want.
2 Determine the ordering method to be used and contact
Symmetricom.
Parts Identification
To identify the part(s) you want, first refer to the exploded view in Figure 5-1
at the back of this chapter or Figure 2-1 in chapter 2.
When ordering from Symmetricom, the important numbers to note from the
Parts List are the Part Number and the quantity of the part you want.
If the part you want is NOT identified in the manual, then it is not available for
replacement and the 5071A must be sent to Symmetricom for servicing.
Table 5-1 lists those parts that can currently be purchased.
To Next Page
Loading...
Need help?
General
