1. Performance Tests – Verifying Specifications
5071A Operational Verification
6
NOTE
The 5071A powers up at shipment receipt with the following
configuration:
Output Ports:
Port 1 5 MHz output
Port 2 10 MHz output
RS-232C:
Baud rate 2400
Data bits 8
Parity none
Stop bits 1
System Logs:
Printer log disabled
Error log lock
completed
These first-time power-up configurations can be changed by
using the front panel controls. See the section titled “Setting the
Output Port Frequency” in the 5071A Operating and
Programming Manual for instructions on how to do this.
To Next Page
Loading...
