APPENDIX C
• Both inside and outside, secure the cable as close as possible to the arrestor. This relieves
strain on the N connectors and the arrestor.
* * * WARNING * * *
Please adhere to the following recommendations to prevent accidents during the installation of
the Lightning Arrestor:
Disconnect or switch off in-line equipment when installing or inspecting the Lightning
Arrestor. Also, do not install or inspect the Lightning Arrestor during an electrical storm.
When connecting the Lightning Arrestor or when changing the gas capsule arrestor, make sure
that the connecting equipment and components are disconnected or switched off.
ET6xxx ExacTime GPS TC & FG (Rev C) Symmetricom Inc
C-50