APPENDIX D
ANTENNA REPLACEMENT KIT
D.0 ANTENNA REPLACEMENT KIT
Please note that the GPS antenna equipment described in this manual has been superseded by the
following Standard Antenna Kit, consisting of:
• One wide-range 5-12 VDC L1 antenna
• One 50 ft. length of Belden 9104 coaxial cable with BNC(m) and TNC(m) connectors
• Adaptors are included for GPS receivers that have a non-BNC antenna connector
The Antenna Kit can be ordered with optional cable lengths and accessories. Please note the
following when setting up longer cable runs:
• Using Belden 9104, the maximum cable length without amplification is 150 feet
• Using Belden 9104, the maximum cable length using the optional in-line amplifier is 300 feet
• For cable runs longer than 300 feet, an optional GPS Down/Up Converter kit is available
Other GPS Antenna Options:
• A Lightning Arrestor kit
• A 1:2 splitter (distributes the signal from a single antenna to two GPS receivers)
Symmetricom Inc ET6xxx ExacTime GPS TC & FG (Rev C) A-1
To Next Page
Loading...
Need help?
General
