6 systemair
1.5 Dangers and warnings
• The intended use, operational conditions, inlet and outlet parameters, composition of the functions, dimensions,
shape, place of installation, dimensions of shipment units, method of transport and handling at the place of
installation,aswellasthecontrolsystemvariantandotherspecications,aredeterminedandconrmedatthetime
of placing the order.
• AKAairhandlingunitmayonlybeinstalled,inspected,commissionedandmaintainedbyqualiedprofessionals,and
such professionals must observe both the statutorily prescribed and local safety and other legal regulations in force at
the time of the installation, operation and maintenance of the unit.
• In the process of installing, commissioning and maintaining the KA air handling unit, the functional elements of the
manufacturer’s instructions must be followed.
• Prior to any intervention in the unit, the entire unit must be isolated from the power supply by means of the main
switch on the electric control cabinet.
• Uponthecompletionofworkonorinsidetheunit,theunitmustbecleanedandrestoredtotheconditionpriortothe
intervention.
• Theinstructions,electricdiagramsandotherdatamustbekeptaccessibletothepersonneloperatingtheunit.
• The air handling unit may only be used for the intended use and under the operating conditions determined in the
conrmationoftheorderaccordingtowhichtheunitwasmanufactured.
Caution
Any other use deviating from the so-determined intended use relieves the manufacturer of any
obligation or liability.
• Systemair d.o.o, the manufacturer of the KA air handling unit, does not accept any liability in the event the directions
indicated in these instructions are not adhered to while installing, commissioning, operating, testing or maintaining
the air handling unit, or in the event of any alterations to the unit’s electrical or mechanical elements by any person
without the manufacturer’s consent, unless such alterations have been explicitly allowed by the manufacturer. Any
unauthorised intervention in the unit will also result in the warranty being void.
• The KA air handling unit manufacturer, Systemair d.o.o., does not accept liability for any damage suffered by persons
or property as a direct or indirect consequence of non-compliance with the provisions of these instructions, or non-
compliancewiththesafetyatworkregulationsorotherlegalregulationsinforce.
• The KA air handling unit manufacturer, Systemair d.o.o., reserves the right to modify these instructions without prior
notice or this giving rise to any obligation.
Caution
It is highly advisable that the commissioning of the unit is done after all construction and cleaning of the
constructionsiteisnished.
Commissioningoftheunitbeforethismightresultinthelters,unitandductsystembeingaffectedby
dust.
To Next Page
Loading...
Need help?
General