IP30 Label Printing Scale Operation Manual
Method 1: Press key at the main menu screen, and press “Power Off” at the pop up screen to power off
Method 2: Long press power-on button,the power will be off.
4) Restart scale
Press key at the main menu screen, and press
“
Restart
”
at the pop up screen to restart the scale ,scale will
power off and then come to normal weighing mode.
Note: Avoid disconnecting the mains power supply directly when switch off the scale, otherwise the
weighing data will be lost.
3.9. Transport and Storage
Always transport and store the device in its original packaging.
3.9.1. Decommissioning
Switch off the scale
Remove all cables and connections from the scale
Clean the scale as per the cleaning instructions
Store the device in its original packaging
To Next Page
Loading...
