The weighing scale is a precision electronic instrument, handle it
carefully.
1) The device must only be operated by personnel trained in the
operation of this equipment.
2) The operating personnel must read and understand the safety
instructions in these operating instructions.
3) To prevent any accident, only qualified service personnel is
authorized to open this device!
4) Verify the local voltage and receptacle type are correct for the
scale.
5) Only use original adaptor, other could cause damage to the scale.
6) Pluggable equipment must be installed near an easily accessible
socket outlet.
7) Avoid unstable power sources. Do not use near large users of
electricity such as welding equipment or large motors.
8) Avoid sudden temperature changes, vibration, wind and water.
9) Avoid strong pressure or scratching the surface with hard, sharp
or pointed objects.
10) Avoid heavy RF noise.
11) Scale is not waterproof and insect prevention. Do not spray or
immerse scale in water. Please keep scale clean.
12) Do not install the scale in direct sunlight.
13) Do not use tools to open the casing.
14) Do not use organic acid, alkaline solutions, scouring powders or
plastic dissolving cleaning agents for cleaning.
To Next Page
Loading...
Need help?
General
