TA Instruments DHR Series User Manual

DHR/AR Series SALS Accessory Getting Started Guide Page 15
Specifications
Table 1: SALS Accessory Specifications
q Vector Range
~1.38µm
-1
to 6.11µm
-1
Scattering Angle ~6° to 26.8°
Laser 635nm 0.95mW class 2
Peltier Temperature Controlled 5 to 95°C
WARNING: The upper temperature limit is set by the optical adhesive that
retains the sapphire window. Do no exceed this limit.
Avertissement: Le limite de température supérieure est réglée par l'adhésif
optique qui retient la fenêtre de saphir. Ne dépassez pas cette limite.

TA Instruments DHR Series Specifications

General

Brand	TA Instruments
Model	DHR Series
Category	Measuring Instruments
Language	English