TA Instruments DHR Series User Manual

DHR/AR Series SALS Accessory Getting Started Guide Page 17
Connecting the Camera and Installing the Drivers
To get your camera up and running, follow these steps before plugging in the camera USB cable:
1 Download the LuCam Software V6.0.3 or higher from the link below:
http://www.lumenera.com/support/downloads/industrial-downloads.php
2 Run the downloadable executable LuCamSoftware-v6.0.3.exe and follow the instructions given.
3 Once installed, plug in the camera to a spare USB port and follow the instructions to install from the
“recommended” location.

TA Instruments DHR Series Specifications

General

Brand	TA Instruments
Model	DHR Series
Category	Measuring Instruments
Language	English