TA Instruments DHR Series User Manual

DHR/AR Series SALS Accessory Getting Started Guide Page 29
Calculating the Optics Correction Factor
The two system calibration factors are determined using a worked example in Excel.
This section shows a worked example using Microsoft Excel, Laven data and Intensity vs. Radius (pixels)
date from ImageJ.
Open the .txt file created by the Laven program in Excel. See the figure below.
Figure 20 Excel spreadsheet displaying Laven data.

TA Instruments DHR Series Specifications

General

Brand	TA Instruments
Model	DHR Series
Category	Measuring Instruments
Language	English