3. Power on the TX1.
4. The Sources drive counter will increment by one to let you know your IDE drive is con-
nected. Tap the Sources tab to view IDE drive details.
PCIe Adapters
PCIe adapters (also compatible with other Tableau PCIe Forensic Bridges) allow the TX1 to
acquire PCIe SSD media and connect to the TX1 source native PCIe interface.
Visit the Tableau product website to learn more about available Tableau PCIe adapters.
Apple Target Disk Mode Acquisition Adapters
The TX1 is designed to acquire Apple computers that support Target Disk Mode. This can be
done via three different Apple computer connection interfaces: USB-C, FireWire, and
Thunderbolt 2. Depending on the Apple computer interface connection, different adapters
and/or cables are required to allow for connection to the source side of the TX1.
Note: Some macOS storage configurations that use FileVault encryption may not be
fully exposed while the Macintosh is in Target Disk Mode and, therefore, may not be
accessible, or only partially accessible, from the TX1. Contact the Guidance Software
Technical Support team for more information.
CHAPTER 5 Adapters 113
To Next Page
Loading...
