Tableau TX1 - Thunderbolt 2 Adapter Cable

Thunderbolt 2 Adapter Cable
Adapting from a Thunderbolt 2 connector on a Mac to the TX1 requires two separate
adapters/cables. A Thunderbolt 2 to FireWire 800 (9-pin) adapter is used along with the same
FireWire 800 (9-pin to 9-pin) cable shown above to connect between the Thunderbolt 2 port on
the Macintosh and the TX1 FireWire 800 port. A Thunderbolt 2 to FireWire 800 adapter is
shown below.
CHAPTER 5 Adapters 115