Startup Sequence
When turned on, the TX1 displays an initialization screen during the boot sequence. Once
booted, the TX1 displays the Home screen and then sequentially powers on connected drives.
Configuring the TX1
The TX1 default settings are defined using sensible, best-practice values. There are many
options and settings you can configure and customize to your specific needs. Tap the Side
Navigation menu icon in the upper left corner to access the following options:
l Home: Return to the Home screen.
l Logs: Access the forensic log screen.
l System Settings: Access the System Settings screen.
l Network Settings: Access the Network Settings screen.
l Defaults: Access the Operations Defaults screen.
l About: Access the About screen to view additional information such as the firmware build
Id, serial number, network MAC address, copyright, and licensing information.
System Settings
Tap System Settings to display the System Settings page.
24 Tableau TX1 User Guide Version 2.0
To Next Page
Loading...
