This status screen is similar to other TX1 job types, with the following notable differences:
l While the operation is scanning for more files to acquire, the progress bar displays as an
indeterminate bar (throbbing/pulsing bar with no data rate displayed). The TX1 does not
know how many bytes it needs to acquire until the scan is complete.
l Three new status fields show the live status of the scanned files:
o
Scanned shows the number of files the job has checked so far to see if it should
include them.
o
Matched shows the number of files that will be acquired by this job out of the num-
ber of files scanned.
o
Imaged shows the number of files that have been fully acquired out of the number
of files matched.
l The Settings section includes the settings specific to logical imaging that have been con-
figured for the active job.
l The Included Files section shows a text summary of the rules used by the active job to
determine which files should be acquired.
CHAPTER 4 Using the TX1 73
To Next Page
Loading...
