tae TA-U110 HT User Manual

TA-U1...U280
Instruction and Operating Manual
Misprints and technical changes reserved
7
Main input
Main input and BUSS Voltage
Main input
and BUSS Voltage
Main input
Removable cover
with SmartCard, must
be removed before
you take off the cover
Motor connection, BUSS Voltage
and Brake resistor
Motor connection, BUSS Voltage
and Brake resistor
Motor connection
Motor connection
TA-U 1...6
TA-U 22...65
TA-U 8...15
TA-U 75...150
PG 4001
4Q
SR
B
Bus
RS 422 / 485
A
I-L
V
U
W
U
V
W
PE
+
-
R1 R2
PE
L1 L2 L3
L+
L-
PE
L1 L2 L3
L+
L-
PE
U
V
W
+
-
R1 R2
L+
L-
L1 L2 L3 PE +
-
UVW PE
L+
L-
L1 L2 L3 PE +
-
PE UVW
RS 422 / 485
W
U
V
I-L
A
B
SR
4Q
Bus
universal drive
0 Ready For Run
1 Run (Enabled)
C1 DRV-Temp Warning
C2 MOT-Temp Wa rning
C3 Value Out Of Range
C4 Safe Stop
C5 DRV Locked Ref>0
C6 Pow-Stage Disabled
F0 Motor Overtemp.
F1 Overcurrent
F2 Drive Overtemp.
F3 Undervoltage
F4 Overvoltage
F5 Rippel Current
F6 Po sion Sensor
F7 Speed Sensor
F8 Electronic
F9 IGBT Short-Circ uit
E1 External Erro r
PG 4001
4Q
SR
B
Bus
RS 422 / 485
A
I-L
V
U
W
universal drive
0 Ready For Run
1 Run (Enabled)
C1 DRV-Temp Warning
C2 MOT-Temp Warning
C3 Value Out Of Range
C4 Safe Stop
C5 DRV Locked Ref>0
C6 Pow-Stage Disabled
F0 Motor Overtemp.
F1 Overcurrent
F2 Drive Overtemp.
F3 Undervoltage
F4 Overvoltage
F5 Rippel Current
F6 Po sion Sensor
F7 Speed Sensor
F8 Electronic
F9 IGBT Short-Circuit
E1 External Erro r
PG 4001
0 Ready For Run
1 Run (Enabled)
C1 DRV-Temp Warning
C2 MOT-Temp Warning
C3 Value Out Of Range
C4 Safe Stop
C5 DRV Locked Ref>0
C6 Pow-Stage Disabled
F0 Motor Overtemp.
F1 Overcurrent
F2 Drive Overtemp.
F3 Undervoltage
F4 Overvoltage
F5 Rippel Current
F6 Po sion Sensor
F7 Speed Sensor
F8 Electronic
F9 IGBT Short-Circ uit
E1 External Erro r
PG 4001
TA-U15
universal drive
4Q
SR
B
Bus
RS 422 / 485
A
I-L
V
U
W
TA-U110
0 Ready For Run
1 Run (Enabled)
C1 DRV-Temp Warning
C2 MOT-Temp Warning
C3 Value Out Of Range
C4 Safe Stop
C5 DRV Locked Ref>0
C6 Pow-Stage Disabled
F0 Motor Overtemp.
F1 Overcurrent
F2 Drive Overtemp.
F3 Undervoltage
F4 Overvoltage
F5 Rippel Current
F6 Posion Sensor
F7 Speed Sensor
F8 Electronic
F9 IGBT Shor t-Circuit
E1 External Erro r
PG 4001
universal drive
3. Description of the Product
3.1 Introduction
3.1.1 Usability
Referring to power asynchronous and permanet magnet synchronous motors can be connected to this device which
are specified by TAE.
3.1.2 Protection Against Irregular Usage
Caution! Do not apply mains to the output terminals U, V, W.
All devices are tested against high voltage and isolation resistance. Measuring of isolation resistance is not allowed

tae TA-U110 HT Specifications

General

Brand	tae
Model	TA-U110 HT
Category	DC Drives
Language	English