TM8100/TM8200 Service Manual General Information 119
© Tait Electronics Limited November 2007
4.6 Shielding Cans and Connectors
The shielding cans on the top- and bottom-side of the main-board assembly
are identified in Figure 4.3 and Figure 4.4. The figures also show the
locations of the connectors on the board.
Figure 4.3 Shielding cans and connectors (top side of main-board assembly)
Digital Board
SK102
Internal-Options Connector
PL101
Factory
Connector
PIN TOP LPF TOP
DIRC TOP
FE TOP
VCO TOP
(UHF only)
PAF TOP
IF TOP
SYN TOP
CDC TOP
FCL TOP
PAD TOP
To Next Page
Loading...
