580 TMAA04-05 Ignition Sense Kit TM8100/TM8200 Service Manual
© Tait Electronics Limited November 2007
30.3 Radio Programming
Startup/Shutdown
form
In the Power On Mode field, set how the radio responds when the radio
receives a signal to power on from the vehicle’s ignition signal.
■ Select either ‘Power On’ or ‘Previous State’.
Programmable
I/O form
(Digital tab)
In the Digital tab, set the following fields:
■ Set AUX GPI3 line to ‘Power Sense (Ignition)’.
■ Set Active to ‘High’.
Refer to the online help of the programming application for
more information.
To Next Page
Loading...
