Tait TM8100 Protocol Manual

28 CCDI TM8100/TM8200 Computer-Controlled Data Interface (CCDI) Protocol Manual
© Tait Electronics Limited April 2007
f0291CE a command to activate the transmitter.
f0290CF a command to deactivate the transmitter following an “activate
transmitter” command.
f0200D8 enter CCR Mode.
f03011A5 enable volume control.
f03010A6 disable volume control.
f03020A5 set volume level off.
f0402256D set volume level to the maximum of ‘25’.
f03025A0 set volume level to ‘5’.
f03031A3 enable Selcall output.
f03030A4 disable Selcall output.
f03041A2 enable progress message output.
f03040A3 disable progress message output.
f03101A5 enable output SDM on reception.
f03100A6 disable output SDM on reception.
f03111A4 enable caller ID encoder.
f03110A5 disable caller ID encoder.
f03121A3 enable caller ID decoder.
f03120A4 disable caller ID decoder.
f03051A1 enable channel progress message.

Tait TM8100 Specifications

General

Brand	Tait
Model	TM8100
Category	Radio
Language	English