TM8100/TM8200 Computer-Controlled Data Interface (CCDI) Protocol Manual CCDI 43
© Tait Electronics Limited April 2007
1.10.4 MODEL
Solicited.
The MODEL message is sent to the PC in response to a QUERY 0 (model)
command (q010FE). It identifies the type of radio and the version of CCDI
software operating in the radio.
Format m [SIZE] [RUTYPE] [RUMODEL] [RUTIER] [VERSION]
[CHECKSUM]
■ ‘m’ is sent as a single ASCII character and represents the MODEL
command.
■ [RUTYPE] is a single character representing the type of radio.
■ [RUMODEL] is a single character representing the model of the radio.
■ [RUTIER] is a single character representing the tier of the radio.
Character Function
1 Conventional radio
2 Reserved for Trunked radio
3 North American Signalling Conventional radio
4 Dual mode radio
Character Analog radios P25 radios
1 Tait Orca Portable (TOP)
conventional unit
TM9100 mobile
2 TM8200 mobile TP9100 portable
3 TM8100 mobile
Character TM8100/TM8200 Tait Orca portables TM9100/TP9100
1 TM8105, TM8115,
all TM8200 models
Conventional Tait Orca
Elan
all TM9100 models
2 TM8110 Tait Orca Excel all TP9100 models
3 Tait Orca Eclipse
4 Tait Orca 5010/5011
5 Tait Orca 5018
6 Tait Orca 5020/5021
7 Tait Radio Modem
(TRM)
8 Tait Orca 5015
To Next Page
Loading...
Need help?
General
