TM8100/TM8200 Installation Guide Preface 5
© Tait Limited November 2012
Preface
Scope of Manual
This manual describes the installation of the TM8100/TM8200 mobile
radio using the U-bracket, and how to install and connect the microphone,
antenna, emergency switch, and external alert device.
The radio can also be installed in many other ways, using different
combinations of components and accessories. For information on:
■ radio body installation
■ remote control head installation
■ dual control head installation
■ hand-held control head installation
■ dual-radio system
■ desktop installation
refer to "Installation Options" on page 32, the installation instructions
provided with the equipment, and the relevant sections in the service
manual.
Some installation options may not be suitable for some models of radio.
Consult your nearest Tait Dealer or Customer Service Organization for
more information.
For information on installations with two bodies and one control head refer
to the TM8260 Installation and Programming Guide (MMA-00041-xx).
Associated Documentation
The following associated documentation is available for this product:
■ MTA-00011-xx Safety and Compliance Information
■ MMA-00002-xx TM8100 User’s Guide
■ MMA-00051-xx TM8235 User’s Guide
■ MMA-00003-xx TM8250/TM8255 User’s Guide
■ MMA-00040-xx TM8260 User’s Guide
■ MMA-00041-xx TM8260 Installation and Programming Guide
■ MMA-00005-xx TM8100/TM8200 Service Manual
The characters xx represent the issue number of the documentation.
This publication is also available in French (MMA-00044-xx),
Spanish (MMA-00045-xx), and Chinese (MMA-00048-xx).
To Next Page
Loading...
Need help?
General
