Tait TM8100 Installation Guide

TM8100/TM8200 Installation Guide Installation Options 39
© Tait Limited November 2012
4.5 Dual-Radio System
Dual Radio Bodies In a dual-radio system one control head is connected to two radio bodies.
A dual-radio system can operate as a crossband repeater, where transmissions
received on one radio can automatically be transmitted on the other. It can
also allow the user to receive and transmit simultaneously on two separate
frequency bands without the need for manual switching. The following
diagram summarizes how the components are installed. The items shown in
bold are part of a typical dual-radio system. Other equipment listed may
need to be obtained or ordered separately. Refer to the TM8260 Mobile
Installation and Programming Guide (MMA-00041-xx) for full details.
b
external speaker
j
radio body
c
flying lead connector
1)
body remote interface with link J4
removed
d
cross-band linking, GPS, and
external interface cable
1!
to control head, such as graphical-
display (see example) or hand-held
e
radio body
f
body remote interface Control head example:
g
grommet
1@
control head remote cable
h
radio connecting cable
1#
control head remote interface
i
other connectors from cross-band
cable, for example, to GPS
antenna/receiver, external alert
device, ignition signal
1$
graphical-display control head
1%
supported microphone
d
e
j
f
h
1@
1#
1$
to antenna
to second antenna
to power supply to power supply
other
connectors
I
to speaker
b
to speaker
b
1%
g
Optional
Required
1)
c
1!
Control head
example

Tait TM8100 Specifications

General

Brand	Tait
Model	TM8100
Category	Radio
Language	English