Operating in conventional mode 47
Suspending a channel from a voting group
You may be able to use the function key programmed
for ‘nuisance delete’ to temporarily remove one of the
channels from the voting group.
To remove a channel from a voting group:
1 Wait until the radio has stopped on the channel that
you want to remove from the voting group.
2 Press the function key programmed for nuisance
delete.
If the channel has been removed successfully, the
message
Channel nuisance deleted briefly appears in
the display.
The channel remains removed from the voting group
until you either select another voting group or the
radio is turned off and then on again.
Note: The function key programmed to activate a
voting group may be programmed so that a short key
press activates voting and a long key press activates
nuisance
delete.
Channel
nuisance
deleted
To Next Page
Loading...
