Operating in P25 trunking mode 69
Failsoft mode operation
If your radio is unable to access the trunking system, it
may be programmed to enter failsoft mode. Failsoft
mode operates in one of two ways: ‘radio-based’
failsoft and ‘infrastructure’ failsoft.
Radio-based failsoft
When you loose access to the trunking system, no
longer appears, the bars in the RSSI symbol disappear
, and the display shows No service.
After a short time, your radio switches to a programmed
conventional communications channel.
The radio remains on that channel until you select a
trunked talkgroup with access to the trunking system.
Infrastructure failsoft
Your radio receives a message from the trunking
infrastructure to say that the trunking system is now
operating in failsoft mode.
While in failsoft mode, the display shows Failsoft, and
the radio sounds a repeating double beep. The double
beep continues until normal service is
restored.
Talkgroup 1
No service
Menu
Channel 1
Zone 11
Menu
Failsoft
Zone 11
Menu
To Next Page
Loading...
