Tait TM9100 - Operation in Transmit Mode

54 Operating in conventional mode
3 The information that may appear is explained in the
example below.
Adding a channel to a group
1 In the Edit Group menu, select Add channel and
press
Select.
A list of channels that are not group members
appears.
2 Select the channel you want to add and press OK.
Deleting a channel from a group
Note: You cannot delete the priority 1 channel using
the Delete Channel menu.
1 In the Edit Group menu, select Delete channel and
press
Select.
A list of group members that are able to be deleted
appears.
2 Select the channel you want to delete and press OK.
Group members
C:Channel 1
C:Channel 2
transmit
channel
priority 1
channel
channel name
zone
SelectBack
Add channel
C:Channel 5
C:Channel 6
OKBack
Delete channel
C:Channel 3
C:Channel 4
OKBack