Tait TM9100 - Hearing Only Channel Traffic

Customizing your radio 83
2 Scroll to On or Off and press Select. (The current
setting is highlighted.)
The message Quiet operation activated
(or
deactivated) appears in the display.
Hearing only channel traffic
You can turn off all the audible tones that the radio
makes so that the only sound you will hear from the
speaker is channel traffic. This is known as ‘silent
operation’.
When silent operation is turned on appears in
the display.
To turn silent operation on or off:
1 Press Menu, and select Radio settings > Alert
settings
> Silent operation.
(Depending on how your radio is programmed, you
may be able to press a function key to turn silent
operation on or off.)
2 Scroll to On or Off and press Select. (The current
setting is highlighted.)
The message Silent operation activated
(or
deactivated) appears in the display.
Quiet operation
Off
On
SelectBack
Silent operation
Off
On
SelectBack