Scanning a group of channels 35
Listening to channel traffic
Q your radio calls the channel where activity was
last detected, or
Q your radio calls the last free channel.
3 When the called party responds, proceed with
your conversation.
About nuisance delete
If the radio is continuously stopping on an undesired
channel (for example, if there is too much activity or
even interference) while scanning, you may be able to
temporarily remove this channel from the scan group.
Removing a channel from a scan group
When the radio has stopped on the channel that you
want to remove from the scan group, press the function
key programmed for this purpose.
If the channel has successfully been removed from the
scan group, the message Channel deleted from
group appears in the display:
Scanning automatically begins again. The channel
remains removed from the scan group until you either
select another scan group or the radio is turned off and
then on again.
Editing a background scan group
Your radio may be programmed so that you can
permanently change the membership of your
background scan group by using the function key
programmed for nuisance delete.
Channel deleted
from group
To Next Page
Loading...
