60 Troubleshooting
Troubleshooting
When your radio won’t turn on
If the red LED on the radio does not light up when the
radio is turned on, it is probable that power is not
reaching the radio. Check the following:
Q Is the battery firmly attached to the radio?
Q Is the battery sufficiently charged?
Q Is the battery charger working properly?
If all appears to be in order, but your radio still fails to
operate properly, contact your radio provider for
further assistance.
Removing a belt clip
The belt clip has been designed to prevent accidental
removal, but you can take it off, if required.
To remove a belt clip from a battery:
1 Insert a flat screwdriver blade or similar flat object
under the lip of the release lock (that is, between it
and the metal slider).
2 Lift the release lock up (away from the metal slider)
and hold it in position.
3 Slide the belt clip out.
release lock
metal slider
black plastic clip
release lock
metal slider
To Next Page
Loading...
