64 About display and keypad backlighting
Customizing your radio
About display and keypad
backlighting
Whenever the keypad is pressed, the three-way or
channel selector controls are turned, or a call is received,
the keypad and display light up automatically to make it
easy to read in poor light conditions.
Backlighting usually remains on for a few seconds,
unless further radio activity is detected. The period of
time that the backlighting remains on once no further
radio activity is detected is determined by the
backlighting timer. The duration of this timer is set
when the radio is programmed.
The radio’s display can also be made darker or lighter to
suit your working conditions. See “Adjusting the display
contrast” on page 65.
Turning backlighting on or off
Using the Main menu
You can turn backlighting on and off using the
Main menu:
1 Press Menu and select Radio settings > Display
settings > Backlighting.
2 Scroll to either On or Off and press Select. (The
current setting is highlighted.)
The message Backlighting activated (or
deactivated) appears in the display.
Off
Backlighting
SelectCancel
On
Backlighting
activated
To Next Page
Loading...
