Adjusting the display contrast 65
Customizing your radio
Using a function key
You can turn backlighting on and off using a function
key, if your radio is programmed in this way.
Q Press the function key to turn backlighting on. It
remains on until you press the function key again.
Note: You can turn backlighting on momentarily using
a function key, if your radio is programmed in this way.
Backlighting remains on for a few seconds and then
turns off.
Adjusting the display contrast
You can change the contrast of your radio display to suit
the lighting conditions that you are working in.
1 Press Menu, and select Radio settings > Display
settings > Contrast adjust.
2 Use the scroll keys or to adjust the display
contrast to the level you want.
3 Press Select to accept the setting.
Select
Cancel
Use the up and down
keys to increase and
decrease contrast
To Next Page
Loading...
