2-47
CONTROLS
SPECIFICATIONS
General
Power Supply Requirements
.................................DC 12 Volts, Negative
Ground
Chassis Dimensions .131.6 (W) x 47.5 (D) x
86 (H)
Loading Impedance .. 4 -8 ohms per channel
Tone Controls ...........Bass (at 100 Hz), ±10
dB; Treble (at 10 kHz),
±10 dB
Current Drain ............1.5 Ampere (max)
FM Tuner
Tuning range ............. 87.5-108.0
FM mono sensitivity ..1.5uV
Stereo separation @ 1 kHz
.................................>25dB
AM Tuner
Tuning range ............. 522-1710
Sensitivity .................<30uV
Weather Band
Sensitivity ................. <1uV
Amplifier
Total system power ...15 Watts Maximum
Signal to Noise .........>70dB
Specifications subject to change without
notice.
Note: The manufacturer is not responsible
for any radio or TV interference caused by
unauthorized modifications to this
equipment. Such modifications could void
the User’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.
Note: Specifications and dimensions may be
changed without notice.
ACCESSORIES
To Next Page
Loading...
Need help?
General
