2-54
CONTROLS
ACCESSORIES
BLOW BY HEATER LAMP (IF EQUIPPED)
When the blow-by heater is actuated, this
lamp turns on.
The heater is actuated when the starter
switch is ON. If the lamp does not turn on or
goes off, the heater is faulty.
If this is the case, consult your sales or
service dealer for help.
ACTIVE POWER CONTROL (IF EQUIPPED)
This system helps prevent the engine from
stalling and allows the engine to maintain its
optimum torque.
Active power control switch
<TL8>
<TL10/TL12>
2. Press the lift arm lower button (2) to lower
the lift arm.
O ........OFF
I ..........ON
To Next Page
Loading...
