Takeuchi TL10 - Inspecting by Walking Around the Machine; Inspecting While Sitting in the Operators Seat

5-17
MAINTENANCE
WALK-AROUND INSPECTION
INSPECTING BY WALKING AROUND THE
MACHINE
4. Check lights for dirt, damage and burnt
out bulbs.
5. Check attachments and hoses for
damage.
6. Check the bucket for wear, damage and
looseness.
7. Check the handrail, the steps and the
slip-resistant surfaces for damage and
loose bolts.
8. Check the tracks, track rollers, idlers and
sprockets for damage, wear and loose
bolts.
9. Check for oil leakage from the travel
motor.
10. Check the canopy, cab and guard for
damage and loose nuts and bolts.
11. Check the rear view mirror and room
mirror for dirt, damage and angle
adjustment.
12. Check the labels for dirt and damage.
13. Check the bucket stoppers for damage
and looseness.
INSPECTING WHILE SITTING IN THE
OPERATOR’S SEAT
14. Check the windshield for dirt or damage.
15. Check the seat and seat belt for dirt or
damage.
Check the operator’s seat for dirt, oil or
other combustible materials.
16. Check the monitor, instruments and
switches for dirt or damage.