Tally Dascom DL-210 - 1.8 Control Panel; 1.8.1 LEDs Behavior; 1.8.2 Feed Key Operation

Tally Dascom DL-210 User Guide V1.3
12
1.8 Control Panel
1.8.1 LEDs Behavior
LEDs
LEDs’ behavior
Status
Power
On ○
Power on.
Off ●
Error or power off.
Status
On ○
Paper end.
Off ●
Normal.
Fast blink ○●○●○●○
Label remains in peeler.
Slow blink ○●●○●●○
Ribbon end.
Error
On ○
Print head mechanism is opened.
Off ●
Normal.
Fast blink ○●○●○●○
Print head is over-heated.
1.8.2 Feed Key Operation
 Feed Paper
Under ZPL/EPL mode, press Feed Key once, feed one piece of label;
Under ZPL/EPL mode, hold down Feed Key without release, feed labels continuously.