Tally Dascom DL-210 - 8 COMMAND SETS; 8.1 ESC;POS Command Sets

Tally Dascom DL-210 User Guide V1.3
67
8 COMMAND SETS
8.1 ESC/POS Command Sets
Category
Commands
Function
Print commands
LF
Print and line feed
FF
Print and feed paper to the head of
next page (in page mode)
CR
Print and carriage return
ESC J n
Print and feed paper
Print position
commands
HT
Horizontal tab
ESC $ nL nH
Set absolute print position
ESC D n1...nk NUL
Set horizontal tab positions
ESC \ nL nH
Set relative print position
ESC a n
Select justification
ESC d n
Print and feed n lines
ESC t n
Select character code table
GS L nL nH
Set left margin
GS W nL nH
Set print area width
Miscellaneous
Function
Commands
ESC = n
Select printer
ESC @
Initialize printer
GS P x y
Set horizontal and vertical motion
units
Chinese Character
control commands
FS ! n
Set Chinese character mode
FS &
Select Chinese character mode
FS - n
Turn on/off Chinese character
underline mode
FS
Cancel Chinese character mode
FS 2 c1 c2 d1...dk
Define user-defined Chinese character
FS C n
Select Chinese character code system
FS S n1 n2
Set Chinese character left and right
spacing
FS W n
Turn on/off Chinese double height and
double width
Space commands
ESC 2
Select default line spacing
ESC 3 n
Set line spacing
Control panel
commands
ESC c 5 n
Enable/disable panel buttons