Tally Dascom DL-830 User Guide V1.0
Contents
CHAPTER 1 INTRODUCTION......................................................................................................................... 1
1.1 Features
......................................................................................................................................................
1
1.2 Specifications
.............................................................................................................................................
2
1.3 Consumables
.............................................................................................................................................
3
1.4 Size and Weight
........................................................................................................................................
4
1.5 Unpack and Inspect
..................................................................................................................................
5
1.6 Standard/optional components for the product
...................................................................................
7
1.7 Key components
.......................................................................................................................................
8
1.8 Control Panel
..........................................................................................................................................
13
1.8.1 Normal/Setup modes operation
....................................................................................................
13
1.8.2 Four major setup menus
................................................................................................................
14
1.8.3 Sample for setup steps
...................................................................................................................
14
1.9 Displayed error messages
.....................................................................................................................
15
CHAPTER 2 INSTALLATION......................................................................................................................... 16
2.1 Recommended installation procedures
...............................................................................................
16
2.2 Suitable installation site
........................................................................................................................
16
2.3 Connect the power
..................................................................................................................................
17
2.4 Adjust the media sensors
......................................................................................................................
18
2.4.1 Two types of media sensors
..........................................................................................................
18
2.4.2 Relocate the Gap Sensor
...............................................................................................................
19
2.4.3 Relocate the (Reflective) Black Mark Sensor
.............................................................................
19
2.5 Load the media
.......................................................................................................................................
20
2.5.1 Loading procedures
........................................................................................................................
20
2.5.2 Adjust the media thickness and width
..........................................................................................
22
2.6 Load the ribbon
.......................................................................................................................................
24
2.6.1 Loading procedures
........................................................................................................................
24
2.6.2 Resolve the wrinkled ribbon by adjusting the Ribbon Balance Gear
.....................................
25
2.6.3 Resolve the wrinkled ribbon by adjusting the Ribbon Supply Leveler
...................................
26
2.7 Connect the interface
.............................................................................................................................
27
CHAPTER 3 SOFTWARE INSTALLATION.................................................................................................28
3.1 Installing the Driver
.................................................................................................................................
28
3.2 Installing the Configuration Tool
...........................................................................................................
33
3.3 Config Tool “Connect” Setup process
..................................................................................................
36
3.4 Using the Configuration Tool
.................................................................................................................
40
3.4.1Setup for the media with black marks
...........................................................................................
40
3.4.2 Setup for the LAN connection
.......................................................................................................
42
3.4.3 Setup for the WiFi
............................................................................................................................
43
3.4.4 Setup for the Interface
....................................................................................................................
43
3.5 Upgrading the Firmware
........................................................................................................................
44
CHAPTER 4 SUPPORT UTILITIES.............................................................................................................. 46
4.1 Configuration list (self-test page)
.........................................................................................................
46
4.2 Menu list
...................................................................................................................................................
47
4.3 Hex-dump
................................................................................................................................................
48
4.4 Auto media registration
.........................................................................................................................
48
CHAPTER 5 DIAGNOSTICS AND MAINTENANCE................................................................................. 49
5.1 Diagnostics
...............................................................................................................................................
49
5.2 Restore factory default settings
............................................................................................................
50
To Next Page
Loading...
